Battery Replacement (pair) for Lumex LF1050, LF1090, LF2020 & LF2090 Lift Models
The DPL650BAT part is a pair of Replacement Batteries for Lumex floor lift models LF1050, LF1090, LF2020 and LF2090 Models. This is a new manufacturer authorized part and carries a One (1) year limited.
Charging Your Lumex Lift Batteries
-
Ensure the control box power switch is ON (i.e., the red button is up).
-
Insert the charger plug into the battery box charging socket (the top slot).
-
Insert the other charger plug into the power supply.
-
All LED indicator lights should be ON during charging.
-
When one green LED indicator light illuminates, the batteries require approximately two to three hours to be fully charged.
-
When only the red LED indicator light illuminates, the batteries require approximately seven to nine hours to be fully charged.
-
Unplug the charger FIRST before using the lift.
-
Replace the batteries when frequent charging is required.
Info: The lift will not operate while the batteries are charging. The lift will not operate while the red reset button is down.
NOTICES
- Initially charge your new batteries for 12 hours
- Subsequent charges should not exceed 10 hours
- It is recommended that you do not allow the battery indicator to drop below the last green indicator light
- A battery should provide 1,200 to 1,300 charge cycles over its life when you charge as needed. Leaving batteries plugged in and charging when the battery capacity does not require charging will prematurely shorten the life of the battery
P65 Warning for California residents
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Battery Replacement (pair) for Lumex LF1050, LF1090, LF2020 & LF2090 Lift Models
Battery Replacement (pair) for Lumex LF1050, LF1090, LF2020 & LF2090 Lift Models
The DPL650BAT part is a pair of Replacement Batteries for Lumex floor lift models LF1050, LF1090, LF2020 and LF2090 Models. This is a new manufacturer authorized part and carries a One (1) year limited.
Charging Your Lumex Lift Batteries
-
Ensure the control box power switch is ON (i.e., the red button is up).
-
Insert the charger plug into the battery box charging socket (the top slot).
-
Insert the other charger plug into the power supply.
-
All LED indicator lights should be ON during charging.
-
When one green LED indicator light illuminates, the batteries require approximately two to three hours to be fully charged.
-
When only the red LED indicator light illuminates, the batteries require approximately seven to nine hours to be fully charged.
-
Unplug the charger FIRST before using the lift.
-
Replace the batteries when frequent charging is required.
Info: The lift will not operate while the batteries are charging. The lift will not operate while the red reset button is down.
NOTICES
- Initially charge your new batteries for 12 hours
- Subsequent charges should not exceed 10 hours
- It is recommended that you do not allow the battery indicator to drop below the last green indicator light
- A battery should provide 1,200 to 1,300 charge cycles over its life when you charge as needed. Leaving batteries plugged in and charging when the battery capacity does not require charging will prematurely shorten the life of the battery
P65 Warning for California residents
Original: $220.00
-65%$220.00
$77.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The DPL650BAT part is a pair of Replacement Batteries for Lumex floor lift models LF1050, LF1090, LF2020 and LF2090 Models. This is a new manufacturer authorized part and carries a One (1) year limited.
Charging Your Lumex Lift Batteries
-
Ensure the control box power switch is ON (i.e., the red button is up).
-
Insert the charger plug into the battery box charging socket (the top slot).
-
Insert the other charger plug into the power supply.
-
All LED indicator lights should be ON during charging.
-
When one green LED indicator light illuminates, the batteries require approximately two to three hours to be fully charged.
-
When only the red LED indicator light illuminates, the batteries require approximately seven to nine hours to be fully charged.
-
Unplug the charger FIRST before using the lift.
-
Replace the batteries when frequent charging is required.
Info: The lift will not operate while the batteries are charging. The lift will not operate while the red reset button is down.
NOTICES
- Initially charge your new batteries for 12 hours
- Subsequent charges should not exceed 10 hours
- It is recommended that you do not allow the battery indicator to drop below the last green indicator light
- A battery should provide 1,200 to 1,300 charge cycles over its life when you charge as needed. Leaving batteries plugged in and charging when the battery capacity does not require charging will prematurely shorten the life of the battery
P65 Warning for California residents
